western charm jewelry wholesale How much is the best way to modify the MACD index parameter?

shaw wholesale jewelry Today we are discussing the parameter settings of the MACD indicator.
In general technical analysis software, the fixed 30 -minute MACD parameter is still 12,26,9. That is, the fast EMV parameter is 12; the slow EMV parameter is 26; the DIF parameter is 9.
MACD indicators set according to this set of parameters at the price of 30 minutes. The value that can be brought to the user at 30 minutes is not great, mainly manifested in: operate according to the operating signal given according to this indicator for operation. , Often the best operation time for operation, or loss of future opportunities.
In fact, after passing multiple trials and error verifications, the author found that the 30 -minute K -line MACD index composed of the parameter group 6,30,3 has a high reference value when determining the price buy and selling. Essence
The content discussed in MACD and its parameters, we still need to emphasize several application principles:
one or 30 minutes of the MACD indicator can only be used as a reference signal for short -term buying points and selling points, not to judge The price trend in the future. In other words, you can use this indicator for reference only when you have planned to buy or sell tickets.
and your decision to make a ticket or ticket selling depends on the signal issued by the price daily K -line or weekly K -line indicator system.
. The principle of MACD application in other times, we can think that the higher or lower the value on the vertical coordinates of the indicators, the less likely the indicator to meet the cross (failure of failure) The greater the effectiveness.
So we can take operational operations before the indicators have not appeared or may meet the cross before crossing.
. The principle of application principles from the daily K -line or week K -line MACD indicator is that the MACD indicator in the K -line in 30 minutes does not emphasize the phenomenon of departure -unless this departure lasts long, It should not be considered.
It you only need to care about the cross situation of the DIF line and the MACD line to make a buy or sell operation. The reason is very simple. The time cycle of the 30 -minute K line is very short, and the departure phenomenon often generates false signals.
. The other application principles that we emphasize in the discussion of the K -line or weekly K -line MACD indicator of Japan are still applicable.
macd index parameter settings, most of the parameters of the H1 (60 minutes) K -line MACD indicator of the analysis software are set to 12, 26, 9, that is, the fast EMA parameter is set to 12, the slow EMV indicator is set to 26, the DIF parameter Set to 9. From the perspective of actual operation, the MACD indicators composed of this set of parameters are not good enough. It has obvious lagging on the fluctuation of the price trend. Provide foreseeable signals.
So what is the more suitable parameter value? Through the continuous trial and error test, the author summarizes the price H1 (60 minutes) K -line MACD indicators. Yes: Quick EMA value 6, slow EMV value 30, DIF value 6; fast EMA value 6, slow EMV value 30, DIF value 9.
MACD indicators set up from these two sets of parameter values, both in terms of sensitivity to changes in price trend and early warning of future price trends, have relatively obvious performance changes, and according to time, according to time The span
(note that it is not a cycle) and the differences between the stock and the spot, the accuracy between them will be improved, which can be used as another analysis weapon in the hands of users.

MACD indicators are the most common indicators. Many investors will not be unfamiliar with the principle, use method to advantages and disadvantages of the indicators. How much is the best setting? As mentioned in some textbooks, the main defect of MACD is that its response to the change in price direction is too slow, and it cannot provide useful prompts to the short -term trend. So is there a way to change the MACD indicator is too slow? The author can make up for this defect to a certain extent by changing the fast EMA parameter of this indicator.
The setting of MACD index parameters has two methods. The first one is discussed in this issue. The author believes that setting the fast EMV parameter to 15 and the slow EMA parameter to 90, which is a better setting method.

It analyzed the Shanghai Composite Index, and the index appeared on May 8 this year. From the perspective of the MACD of the parameter value, the indicators actually appeared on April 25th that the dead fork of the DIF line and the MACD line appeared. At the same time, the red column line disappeared, and the green columnar line appeared, showing the trend fell. Of course, after May 19 last year, the index appeared around June 30, and it was not possible to judge whether the broader market was strong adjustment or the market ended. Only after the high fork appears in the high position, we can make a light judgment. At this time, the distribution is distributed. There is a space of about 260 points from the lowest point when the market fell later.

For this parameter setting, the author summarizes some experience for readers for reference:
. In terms of individual stocks, MACD The value of the DIF and MACD cable marked on the vertical axis is very important. Generally speaking, the dead fork that appears when the MACD indicator is at high is often effective. The high level set by this parameter is 1.5 or more. Some super strong stocks can When it reaches 3 to 6, as long as the dead fork appears in these areas, the price can often be seen in the middle line. In the meantime, there will generally be a rebound market.
. As far as individual stocks are concerned, the valid range of the golden cross between the MACD indicator DIF and the MACD line should be below-0.45 below the vertical axis, otherwise it is not significant, but the trend of some super strong stocks may occur. This requires comprehensive judgment with some other indicators.
. Generally speaking, when the DIF and MACD lines continue to rise upward, away from the red cylindrical line, and at the same time, when the red column line continues to shrink or even the green column lines, the indicators should be alert to high dead forks and price trends. Turn.
. The use of this indicator is particularly emphasized. When the price continues to rise, when the new high, the MACD indicator fails to set the high point in the previous stage, which means that the price may fall at any time; the power to run upward is not strong. Similarly, you can also summarize the situation when the price continues to fall.
5. The death of this indicator is issued before the price decline.
6. The judgment of some super -declined strong stocks shall use the comprehensive judgment of the moving average system (55 days, 120 days, 250 days).

wholesale hearts for jewelry making Pay content for time limit to check for freenAnswer Hello, I have seen your question, and you are sorting out the answer. Please wait for a while. We are answering one by one. Please wait patiently. It takes a little time to type. I am glad to serve you.n1. 30 minutes of the MACD indicator cannot be used to judge the trend of long -term trends. It can only be used as a reference signal for short -term buying points and selling points. This means that only when investors decide to buy/sell can the indicators play a role.n2. The same as the MACD indicators in other periods, the higher the value on the vertical coordinates of the indicator, the lower the probability of catering to the cross (failure of the failure), and the greater the effectiveness of the cross. Therefore, investors can operate before the indicators have not appeared or may cater to cross -crossing.n3. MACD indicators do not pay much attention to departure, which is different from the application principle of the daily K -line or weekly K -line MACD index, unless this delegation lasts long. Investors only need to care about the cross situation between the DIF line and the MACD line.n4. MACD index parameter settings, most of the parameters of H1 (60 minutes) K -line MACD indicators of most analysis software are set to 12, 26,9, which is not a practical setting. Through actual combat analysis, the first domain summarizes the price H1 (60 minutes) K -line MACD indicators. There are two groups. The high value is: fast EMA value 6, slow EMV value 30, DIF value 6; fast EMA value 6 , Slow EMV value 30, DIF value 9.nI hope our answers can help you and wish you a happy life! Good people are safe all their lives! Thank youn4 morenBleak

wholesale jewelry pricing
n00:00 / 01: 3770% shortcut keys to describe space: Play / pause ESC: Exit full screen ↑: increase volume 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description