3 thoughts on “Regarding the use of digital cameras to shoot jewelry product pictures! Please answer! Thank you! Thank you!”

  1. Lora

    1,18-55 kravis is basically enough. But it is best to be smaller. If there is a macro head, it is better.
    2, a 1 -centimeter macro card machine and SLR.
    3, you can use the filter lens (polarizing mirror) or lens with filtering. Partial light reflection produced during the photo.
    4, the macro control is best at 5-10 cm. It is best to use yellow or orange light sources to illuminate the light source. If the reflection is too strong, you can consider using a soft light source. You can try to face the multi -directional shooting of jewelry. The best effect is selected. For example, the jewelry is yellow, the light source should be used in white, and the jewelry is white, which is vice versa.
    . The last point. It is best to use light sources to light or highlight the anti -light board, do not shoot with flash. The jewelry can be shot on the background of the color contrast with its color, and it is better to decorate the jewelry (such as placing it on a tilted small table). It is more layered.

  2. Duane

    First of all, it is necessary to buy a 50 × 50cm soft shed
    This jewelery to shoot jewelry. It can block the mixed light and reduce the reflection of the surrounding debris
    R n The reflector can be used to make up light or make high -gloss reflexes. The gray card is used to correct the white balance

    The condition is best to add a hundred microcoscles

    1 device No problem, look at the photos of jewelry and summarize the skills and light of others.
    2 The second -generation hundred micro -lens is very suitable for shooting small parts.
    3 The product with many reflective products requires no miscellaneous interference around it. It is best to be a main light source, one side backlight source, up to a maximum top light, supplement a reflector
    4 to take a few more photos and observe with the eyes more, observe, A few angles, adjust the light more, and slowly explore

    . Finally, I wish you a satisfactory photo.

  3. Steven

    It is best to use a fixed -focus full manual lens to adjust the aperture on the lens (the aperture is an effective means of controlling the texture. You can use the amount of the amount of light to achieve the texture you need. Focus (manual focus can be flexibly grasped and background).
    The contrast between the different light paths on the work is also obvious (pay attention to adjust the light angle and strength of the flash).
    The choice of background is very important.

Leave a Comment

Shopping Cart